#  -*- mode: python; -*-
#============================================================================
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is created using 'xm create'.
# You use a separate script for each domain you want to create, or 
# you can set the parameters for the domain on the xm command line.
#============================================================================

#----------------------------------------------------------------------------
# Kernel image file.
kernel = "/boot/vmlinuz-2.6.10-xenU"

# Optional ramdisk.
#ramdisk = "/boot/initrd.gz"
#ramdisk = "/tmp/sarge-netinst-initrd.gz"

# The domain build function. Default is 'linux'.
builder='linux'
#builder='netbsd'

# Initial memory allocation (in megabytes) for the new domain.
memory = MEMORY

# A name for your domain. All domains must have different names.
name = "NAME"

# Which CPU to start domain on? 
#cpu = -1   # leave to Xen to pick

#----------------------------------------------------------------------------
# Define network interfaces.

# Number of network interfaces. Default is 1.
#nics=1

# Optionally define mac and/or bridge for the network interfaces.
# Random MACs are assigned if not given.
#vif = [ 'mac=aa:00:00:00:00:11, bridge=xen-br0' ]
#vif = [ 'bridge=xen-vdmz' ]

#----------------------------------------------------------------------------
# Define the disk devices you want the domain to have access to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain will see,
# and MODE is r for read-only, w for read-write.

#disk = [ 'phy:loop1,sdc,r', 'phy:loop0,sda1,rw' ]
disk = [ 'phy:datavg/NAME-root,sda1,rw' ]

#----------------------------------------------------------------------------
# Set the kernel command line for the new domain.
# You only need to define the IP parameters and hostname if the domain's
# IP config doesn't, e.g. in ifcfg-eth0 or via DHCP.
# You can use 'extra' to set the runlevel and custom environment
# variables used by custom rc scripts (e.g. VMID=, usr= ).

# Set if you want dhcp to allocate the IP address.
#dhcp="dhcp"
# Set netmask.
#netmask=
# Set default gateway.
#gateway=
# Set the hostname.
#hostname= "vm%d" % vmid

# Set root device.
root = "/dev/sda1 ro"
#root = "/dev/sdc ro"

# Root device for nfs.
#root = "/dev/nfs"
# The nfs server.
#nfs_server = '169.254.1.0'  
# Root directory on the nfs server.
#nfs_root   = '/full/path/to/root/directory'

# Sets runlevel 4.
#extra = "4"
#extra = "initrd=/tmp/sarge-netinst-initrd.gz"
#extra = "DEBCONF_PRIORITY=low vga=normal init=/linuxrc devfs=mount,dall rw debian-installer/framebuffer=false"

#----------------------------------------------------------------------------
# Set according to whether you want the domain restarted when it exits.
# The default is 'onreboot', which restarts the domain when it shuts down
# with exit code reboot.
# Other values are 'always', and 'never'.

#restart = 'onreboot'

#============================================================================